Flexo Concepts

THE "TRU" ADVANTAGE IN FLEXO PRINTING

Tru Point blades are specially designed for today's graphics, and when combined with the right Anilox roll, will produce a superior print finish. Tru-Point plastic blades are set and used like any other doctor blade.  The blade is positioned at an angle to the Anilox roll, with the bevel of the blade facing the ink supply. Tru-Polnt blades come in varying thicknesses and widths, depending on the use, and can be shipped to you in l00ft rolls.
    

Our DACC blade is primarily for fine, high-speed printing, where a thin blade is needed.  It is also excellent for solids.

The bevel blade is cut at 45 degrees for excellent results in virtually all applications.

Plasteel blades are made of a high-density polymer to be thinner than our conventional plastic blades.

Fibreflex composite blades represent our newest technology, combining the advantages of fibreglass with those of plastic.